Quality Adjusting - Panasonic Workio DP-C262 Operating Instructions Manual

Quality Adjusting

Image quality items can be easily set by selecting from 4 image quality types (Vivid, Bright, etc.).
Also, in Custom Setting, the following 7 image quality can be set.
• Background Removal
• Bleed-Through Prevention
• Tint
• Contrast
The default setting of Bleed-Through Prevention, Tint, Contrast, Sharpness and Saturation can be changed.
Refer to Copier Settings (For Key Operator) in the Operating Instructions (for Function Parameters) on the
provided CD-ROM.
Under the following situations, the colour mode settings return to the standard settings.
-If the power is turned OFF.
-If the Reset key is pressed.
-If "Default" in "More Settings" is selected.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "Quality Adj.".
4
Select "More Settings".
22
• Sharpness
• Saturation
• Colour Balance
5
Select an image quality type, and then
select "OK".
Custom Setting
(See pages 24 to 30)
Default Copied with the default image
quality set by the function
parameters.
Vivid Copied with vivid image quality.
Bright Copied with bright image quality.
Warmer Copied with reddish colour
accentuated.
Cooler Copied with bluish colour
accentuated.
The default values are set upon shipment.
Key Operators can change these values,
refer to Copier Settings in the Operating
Instructions (For Function Parameters).