Copying with Stamping
Page Numbers, Date, etc. can be stamped on each sheet.
This function can be selected when the original is placed on the ADF.
Only 1 of the page number, date, control number and characters can be selected to print in 1 scanning. 2 or
more stamps cannot be stamped in 1 scanning.
Stamped only in black.
Basic Operation for Stamping
1
Place original(s) on the ADF.
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "More Menus".
58
4
Select "Zoom/Effects", and then
select "Stamping".
• Page Number (see page 60)
• Issue Number (see page 62)
• Date (see page 64)
• Text Stamp (see page 66)
5
Enter the desired number of copies.
6
Press the Start key.