Copying Mixed Size Originals from the ADF
Use this function when copying mixed size originals (A3 and A4)using with the ADF, original size can
be detected automatically then can be copied to the same size or one specified size.
Ex: A4 and A3
The following 2 combinations are possible.
Original Size 1
Original Size 2
1
A3
A4
2
A4R
A5
If no copy size is specified, the original is copied in the same size. If any copy size is specified, the original is
copied automatically enlarged or reduced in accordance with the specified size.
Only when copying by specifying the same copy size, 2-Sided copying is possible by setting "2-Sided".
Only when copying by specifying the same copy size, the copies can be rotated and printed as a booklet or as
a unit of specified number of pages by setting "Rotate-Sort" or "Rotate-Group".
1
Select "2-Sided/Original->Copy", and
then select "Multi-Size Feed".
To display this screen, refer to steps 1 to 3 of
Basic Operation for the 2-Sided Copy
Mode (see page 38).
Ex: Same Size (Standard Setting)
A4 and A3
2
Select an orientation, and then select
"OK".
Ex: Specified Size
A4
43