Installing The Fbu Holder Into The Chassis; Connecting The Fbu Adapter Cable To The Tfm - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 97: Connecting the FBU adapter cable to the FBU
Ê Connect the cable end on the FBU to the FBU adapter cable as shown.
9.3.2.5

Installing the FBU holder into the chassis

Ê Install the FBU holder into the chassis as described in section
BBU holder into the chassis" on page
9.3.2.6

Connecting the FBU adapter cable to the TFM

Figure 98: Connecting the FBU adapter cable to the TFM
Ê Connect the FBU adapter cable to the TFM.
200 Upgrade and Maintenance Manual
194.
"Installing the
TX120 S3