Ce Conformity (Europe) Notice - Honeywell ST 3000 User Manual

3.2

CE Conformity (Europe) Notice

About conformity and
special conditions
ATTENTION
18 ST 3000 Release 300 and SFC Model STS103 User's Manual
This product is in conformity with the protection requirements of
89/336/EEC, the EMC Directive. Conformity of this product with any
other "CE Mark" Directive(s) shall not be assumed.
Deviation from the installation conditions specified in this manual, and
the following special conditions, may invalidate this product's
conformity with the EMC Directive.
 You must use shielded, twisted-pair cable such as Belden 9318 for all
signal/power wiring.
 You must connect the shield to ground at the power supply side of the
wiring only and leave it insulated at the transmitter side.
The emission limits of EN 50081-2 are designed to provide reasonable
protection against harmful interference when this equipment is operated
in an industrial environment. Operation of this equipment in a residential
area may cause harmful interference. This equipment generates, uses,
and can radiate radio frequency energy and may cause interference to
radio and television reception when the equipment is used closer than 30
meters (98 feet) to the antenna(e). In special cases, when highly
susceptible apparatus is used in close proximity, the user may have to
employ additional
electromagnetic emissions of this equipment.
ATTENTION
mitigating measures to further reduce the
February 2012