Overview; Figure 23 Summary Of Configuration Process - Honeywell ST 3000 User Manual

6.2

Overview

About configuration
ATTENTION
60 ST 3000 Release 300 and SFC Model STS103 User's Manual
Each ST 3000 Transmitter includes a configuration database which
defines its particular operating characteristics. You can use an SFC to
change selected parameters within a given transmitter's database to alter
its operating characteristics. We call this process of viewing and/or
changing database parameters "configuration".
Figure 23 shows a graphic summation of the configuration process.
Figure 23 Summary of Configuration Process
Configuration Database
ST 3000
If the transmitter is operating in the DE mode, you can also configure
the transmitter's configuration database through displays at the
Universal Station or GUS. See the PM/APM Smartline Integration
Manual PM12-410 for details.
Transmitter's
Operating
Characteristics
View and/or
change
database
parameters
SFC
Continued on next page
February 2012