Setup Menu List; Audio Set] Menu - Sony PMW-RX50 Operating Instructions Manual

Setup Menu List

The functions and available settings of menus are listed below.
The default settings set at the factory are shown in bold face (example:
[M] in the Menu items column cannot be set while displaying the thumbnail screen or during playback
operations.

[AUDIO SET] Menu

AUDIO SET
Menu items Subitems and setting values Contents
Audio Input CH1 Input Source
SDI IN / Ext
Setting for audio
inputs
(only when audio
input box is
CH2 Input Source
attached)
SDI IN / Ext
[M]
Note
CH3 Input Source
This item cannot
SDI IN / Ext
be configured
when [i.Link] is
selected for [Input
CH4 Input Source
Source Select] in
SDI IN / Ext
the [VIDEO SET]
menu.
EXT CH Select
CH1/CH2 / CH1
Line Input Ref
+4dB / 0dB / –3dB / EBUL
Reference Level
-20dB / –18dB / –16dB /
–12dB / EBUL
Speed
Select the audio signal input source to be recorded as channel
1 for formats that support audio recording.
[SDI IN]: Record the CH-1 signal of the SDI IN connector.
[Ext]: Record the signal selected in [EXT CH Select].
Select the audio signal input source to be recorded as channel
2 for formats that support audio recording.
[SDI IN]: Record the CH-2 signal of the SDI IN connector.
[Ext]: Record the signal selected in [EXT CH Select].
Select the audio signal input source to be recorded as channel
3 for formats that support 4-channel audio recording.
[SDI IN]: Record the CH-3 signal of the SDI IN connector.
[Ext]: Record the signal selected in [EXT CH Select].
Select the audio signal input source to be recorded as channel
4 for formats that support 4-channel audio recording.
[SDI IN]: Record the CH-4 signal of the SDI IN connector.
[Ext]: Record the signal selected in [EXT CH Select].
Set the signal settings that are selected when [Ext] is selected
for [CH1 Input Source] to [CH4 Input Source].
[CH1/CH2]: Input the audio signal from the CH-1 AUDIO IN
connector to the odd-numbered channel for which [Ext] is
selected, and input the audio signal from the CH-2 AUDIO
IN connector to the even-numbered channels.
[CH1]: Input the audio signal from the CH-1 AUDIO IN
connector to all the channels for which [Ext] is selected.
Set the reference input level that is used when the input source
is set to [Ext] in [CH1 Input Source] to [CH4 Input Source].
The same setting is used for both CH-1 and CH-2 of the
AUDIO connector.
Tip
This setting is only enabled when the input source is set to
[Ext].
Set the output level of the 1 kHz test signal.
Tip
This setting is only enabled when the input source is set to
[Ext].
). The items marked with
Setup Menu List 47