Sony PMW-RX50 Operating Instructions Manual page 82

When [Country] is set to [NTSC Area] or
[NTSC(J) Area], and [Rec Format] is set to [SP
1440/59.94i] in [System] in the [OTHERS]
menu, the output format is as follows.
*** & HDV: HDV 59.94i
*** & DVCAM: SD 59.94i
When [Country] is set to [NTSC Area] or
[NTSC(J) Area], and [Rec Format] is not set to
[SP 1440/59.94i] in [System] in the [OTHERS]
menu, the output format is as follows.
*** & HDV: N/A
*** & DVCAM: SD 59.94i (1920×1080/
23.98P and 1440×1080/23.98P: N/A)
When [Country] is set to [PAL Area] and [Rec
Format] is set to [SP 1440/59.94i] in [System] in
the [OTHERS] menu, the output format is as
follows.
*** & HDV: HDV 50i
*** & DVCAM: SD 50i
When [Country] is set to [PAL Area] and [Rec
Format] is not set to [SP 1440/59.94i] in [System]
in the [OTHERS] menu, the output format is as
follows.
*** & HDV: N/A
*** & DVCAM: SD 50i
Playback
Enabled in FAT mode and UDF/SD mode only
(i.LINK disabled in UDF/HD and exFAT).
When the playback clip format is set to [SP 1440/
59.94i], with [Country] set to [NTSC Area] or
[NTSC(J) Area] and [Rec Format] set to [SP
1440/59.94i] in [System] in the [OTHERS]
menu, the output format is as follows.
*** & HDV: HDV 59.94i
*** & DVCAM: DVCAM 59.94i
When a clip with a different format than that
above is played, with [Country] set to [NTSC
Area] or [NTSC(J) Area], the output format is as
follows.
*** & HDV: N/A
*** & DVCAM: DVCAM 59.94i
(1920×1080/23.98P, 1440×1080/23.98P,
1280×720/23.98P: N/A)
SD: DVCAM 59.94i (UDF/SD mode)
When the playback clip format is set to [SP 1440/
50i], with [Country] set to [PAL Area] and [Rec
Format] set to [SP 1440/50i] in [System] in the
[OTHERS] menu, the output format is as follows.
*** & HDV: HDV 50i
*** & DVCAM: DVCAM 50i
82 Formats and Limitations of Outputs
When a clip with a different format than that
above is played, with [Country] set to [PAL
Area], the output format is as follows.
*** & HDV: N/A
*** & DVCAM: DVCAM 50i
SD: DVCAM 50i (UDF/SD mode)
When [Rec Format] is set to [HQ 1080/23.98P] or
[HQ 720/23.98P] (video format recorded in pure
23.98P), the playback video is not output on
i.LINK (DVCAM).
In UDF/SD mode, playback video is not output
using i.LINK (DVCAM) when [Rec Format] is
set to [IMX50].