Basic Menu Operations - Sony PMW-RX50 Operating Instructions Manual

Basic Menu Operations

Menu controls
MENU button (page 6)
To turn Menu mode to use Setup menus on/off.
Up/Down/Left/Right buttons, SEL/SET button
(page 6)
Press the up/down/left/right buttons to move the
cursor the corresponding direction to select menu
items or setting values.
Press the SEL/SET button to enter the highlighted
item.
CANCEL button (page 6)
To return to the previous layer of the menu. An
uncompleted change is canceled.
Setting the Setup menus
Move the cursor to the icon of the menu you wish
to set, then push the SEL/SET button to select that
menu.
• The menu item selection area can show 7 lines
at maximum. When all the selectable items
cannot be displayed at one time, you can scroll
the display up or down by moving the cursor. A
triangle appears at the upper or lower right
corner of the menu item selection area to
indicate that scrolling is enabled.
• For items having a wide range of available
values (example: –99 to +99), the available
value area is not displayed. The current setting
is highlighted instead, indicating that the setting
is ready for change.
• When you select [Execute] for an execution
item, the corresponding function is executed.
• When you select an item that you must confirm
before execution, the menu display temporarily
disappears, and a confirmation message is
displayed. Following the instructions of the
message, and specify whether to execute or
cancel.
46 Basic Menu Operations
Entering a character string
When you select an item for which a character
string, such as a time value or filename, is to be
specified, the input area for the character string is
highlighted, and [SET] appears at the right end.
1
Select characters, then press the SEL/
SET button to proceed.
The cursor moves to the next column.
To return to the previous column, press the
left button.
2
Perform setting in the same manner up
to the last column/digit.
The cursor moves to [SET].
3
Press the SEL/SET button.
The setting is completed.