Sony PMW-RX50 Operating Instructions Manual page 63

Portable memory recorder
Hide thumbs Also See for PMW-RX50:
Table of Contents

Advertisement

OTHERS
Menu items
Subitems and setting values Contents
Wi-Fi Status
x x x Connecting (display
only)
Wireless Mode
802.11b / 802.11g / 802.11n
Wi-Fi
Enable / Disable
Wi-Fi Remote
On / Off
USB SET
Thumbnail View
Execute / Cancel
Setting for USB
media connection
Select Folder
Rename Folder
Error Check
On / Off
Format USB
exFAT / FAT32
Copy To USB
A t USB / B t USB /
A&B t USB
Copy From USB
USB t A / USB t B
With General
Enable / Disable
Version
Vx.xx
Showing the
version of this unit
Version Up
Execute / Cancel
Updating this unit
Menu Scroll
Normal / Loop
Setting the menu
scroll operation
Display "Connecting" while connection is being attempted.
Display black squares to show the connection status by the
number of squares during communication.
Note
[Wi-Fi Status] is displayed when using the IFU-WLM3 in
Adhoc mode.
Display an IEEE802.11 standard.
Select whether to enable or disable Wi-Fi connection.
Select whether to enable or disable Wi-Fi remote control.
Display the USB media thumbnail screen.
Select a folder on USB media as the destination when
copying clips and for display on the thumbnail screen.
Select [New] to create a new folder.
Rename the current folder.
Select whether to perform error checking when copying clips.
Format USB media.
[exFAT]: Format USB media for copying clips.
[FAT32]: Format USB flash drive for writing planning
metadata (UDF and exFAT mode).
Copy SxS memory card clips to USB media.
Note
Available only when the thumbnail screen is displayed.
Copy USB media clips to SxS memory card.
Note
Available only when the thumbnail screen is displayed.
Enable/disable copying of files in the "General" folder when
copying clips.
The current software version of the recorder is displayed.
Select [Execute] to update the recorder.
Use when updating is required.
Note
This item cannot be selected when no SxS memory card has
been loaded.
Select the method for menu scrolling.
[Normal]: The cursor moves and stops at the top or the
bottom.
[Loop]: The cursor continues moving up (jumping from the
top to the bottom) or down (jumping from the bottom to
the top).
Setup Menu List
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents