Sony PMW-RX50 Operating Instructions Manual page 57

Portable memory recorder
Hide thumbs Also See for PMW-RX50:
Table of Contents

Advertisement

OTHERS
Menu items
Subitems and setting values Contents
Battery Alarm
Low BATT
5% / 10% / 15% / ... / 45% /
Setting the low
50%
power alarm
BATT Empty
3% to 7% (3%)
DC Low Volt1
11.5 V to 17.0 V (11.5 V)
DC Low Volt2
11.0 V to 14.0 V (11.0 V)
Battery INFO
Type
Showing
MFG Date
information
Charge Count
regarding the
battery pack
Capacity
(display only)
Voltage
Remaining
Trigger Mode
Internal / Both / External
Setting for
operating an
external recording
device connected
via the i.LINK
connector (FAT
only)
[M]
System
Country
NTSC Area / NTSC(J) Area /
PAL Area
F.Sys.
UDF / exFAT / FAT
HD/SD
HD / SD
XAVC/MPEG2
XAVC / MPEG2
Set the battery level at which the Low BATT warning is
generated (in steps of 5%).
Set the battery level at which the BATT Empty warning is
generated.
Set the DC IN voltage at which the DC Low Volt1 warning is
generated.
Set the DC IN voltage at which the DC Low Volt2 warning is
generated.
The type (product name) is displayed.
The date of manufacture is displayed.
The accumulated number of times of charge/discharge is
displayed.
The estimated total capacity of full charge is displayed.
The current output voltage is displayed.
The current remaining level is displayed.
[Internal]: To activate recording start/stop operations only for
an SxS memory card in a built-in slot.
[Both]: To activate recording start/stop operations both for an
SxS memory card in a built-in slot and the external
recording device connected via the i.LINK connector.
[External]: To activate recording start/stop operations only
for the external recording device connected via the
i.LINK connector.
Select the area of use and setup ON/OFF setting.
[NTSC Area]: Setup ON
[NTSC(J) Area]: Setup OFF
[PAL Area]: Setup OFF
Note
The default setting is different among the sales areas.
United States and Canada: NTSC Area
Other areas: PAL Area
Switch the file system between UDF/exFAT/FAT.
Switch between HD Mode and SD Mode for recording/
playback.
Switch between the XAVC and MPEG2 formats during
exFAT and HD mode.
Setup Menu List
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents