Sony PMW-RX50 Operating Instructions Manual page 59

OTHERS
Menu items Subitems and setting values Contents
Clip
Auto Naming
C**** / Title / Plan
Setting for clip
name or deletion
Title Prefix
nnn_ (nnn=least three digits of
the serial number)
(Max. 7 characters displayed)
Number Set
0001 to 9999
Update
Media(A) / Media(B)
Last Clip DEL
Execute / Cancel
All Clips DEL
Execute / Cancel
Filter Clips
OK / NG / KP / None
Lock All Clips
Execute/Cancel
Select the method to specify clip names.
C****: UDF and exFAT
[Title]: To specify as desired by [Title Prefix]
[Plan]: To use a name specified in planning metadata (if no
name is specified in planning metadata, the name
specified by [Title Prefix] is used.)
Call the [Character Set] screen to set the title part (4 to 46
characters) of the clip names.
Configuration of the [Character Set] screen
Character selection area (3 lines):
To select a character to insert in the cursor position of the
Title Prefix area.
!#$%()+,-.=@[]^_~0123456789
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Cursor operation area (1 line):
[Space]: To change the character in the cursor position to a
space
[INS]: To insert a space in the cursor position
[DEL]: To delete a character in the cursor position
[T]: To move the cursor to the left
[t]: To move the cursor to the right
[ESC]: To cancel the change and exit the [Character Set]
screen
[END]: To validate the change and exit the [Character Set]
screen
[Title Prefix] area (1 line):
For entering the title
To set the title
1
Select (highlight) a character in the character selection area
to be entered in the cursor position of the [Title Prefix] area.
Then press the SEL/SET button.
2
Repeat Step 1 for setting the title. (Use [Space], [INS], and
[DEL] as required.)
3
When the title setting is completed, select [END] to exit the
[Character Set] screen.
Set the second 4-numeric part of the clip name.
To update the managerial file on the SxS memory card in the
1)
selected slot.
Select [Execute] to delete the last recorded clip.
Select [Execute] to delete all clips on the active SxS memory
card.
Note
Clips to which you applied OK mark and clips that are locked
cannot be deleted.
Select from among [OK] (the OK flag), [NG] (the not good
flag), [KP] (the keep flag), or [None] (for no flag) to filter
displayed clips. (UDF and exFAT)
Select [Execute] to protect all clips. (UDF and exFAT)
Setup Menu List 59