Table of Contents
Advertisement
VIDEO SET
Menu items
Setting values
SDI/HDMI/
In UDF/HD mode
i.LINK I/O
Select
Selecting input/
output signals for
In exFAT/HD mode
the connectors
In FAT/HD mode (HQ)
In FAT/HD mode (SP)
In UDF/SD mode
In exFAT/SD mode
In FAT/SD mode
SDI OUT1
Normal / Through / Auto
Mode Select
Setting the output
mode of the SDI
OUT 1 connector
SDI OUT2
3G / HD
OUTPUT
Select
Setting the output
signal of the SDI
OUT 2 connector
50
Setup Menu List
HD
SD
SD P
Off
3G (SDI)
HD
SD
SD P
Off
HD
SD & DVCAM
SD P
Off
HD & HDV
SD & HDV
SD P & HDV
SD & DVCAM
Off
SD
Off
SD
Off
SD & DVCAM
Off
Contents
[3G (SDI)]: Output a 3G SDI signal from the SDI OUT 1/2
connectors, and an HD HDMI signal from the HDMI
OUT connector.
[HD]: Output an HD SDI signal from the SDI OUT 1/2
connectors, and an HD HDMI signal from the HDMI
OUT connector.
[SD]: Output an SD SDI signal from the SDI OUT 1/2
connectors, and an SD HDMI interlaced signal from the
HDMI OUT connector. In UDF/SD mode, DVCAM
stream is input/output on the i.LINK connector.
[HD & HDV]: Output an HD SDI signal from the SDI
OUT 1/2 connectors, and an HD HDMI signal from the
HDMI OUT connector. Input/output an HDV stream on
the i.LINK connector.
[SD & HDV]: Output an SD SDI signal from the SDI
OUT 1/2 connectors, and an SD HDMI interlaced signal
from the HDMI OUT connector. Input/output an HDV
stream on the i.LINK connector.
[SD P & HDV]: Output an SD HDMI progressive signal
from the HDMI OUT connector. Input/output an HDV
stream on the i.LINK connector. No signal is output from
the SDI OUT and VIDEO OUT connectors.
[SD & DVCAM]: Output an SD SDI signal from the SDI
OUT 1/2 connectors, and an SD HDMI interlaced signal
from the HDMI OUT connector. Input/output a DVCAM
stream on the i.LINK connector.
[SD P]: Output an SD HDMI progressive signal on the
HDMI OUT connector. No signal is output from the SDI
OUT 1/2 and VIDEO OUT connectors.
[Off]: No output from each of the SDI/HDMI/i.LINK
connectors. A composite signal is output when composite
signal output from the VIDEO OUT connector is enabled.
Set the video signal output mode for the SDI OUT 1
connector.
[Normal]: Output the same video as the LCD monitor.
[Through]: Always perform through output of the SDI IN
input signal.
[Auto]: Output the playback video when playback is being
performed on the recorder, and output the SDI IN input
signal at all other times.
Set the output signal of the SDI OUT 2 connector.
[3G]: Output a 3G SDI signal.
[HD]: Output an HD SDI signal.
Tip
This setting is only enabled when the [SDI/HDMI/i.LINK I/O
Select] is set to [3G (SDI)].
Note
When [3G (SDI)] is not selected, the signal set in [SDI/
HDMI/i.LINK I/O Select] will be output. However, if
[System] >[HD/SD] is set to [HD] and [SDI/HDMI/i.LINK I/
O Select] is set to [SD], no signal will be output.
Hide quick links:
Advertisement
Table of Contents
