Advertisement
To change the IP address of the System Controller to match your network
settings:
The following section describes how to change the IP address of the system controller. Perform this step:
if you have followed the previous steps to change you computer's IP address so it starts with
192.168.0, and you are now ready to set the correct IP address for the System Controller, or
if your computer's IP address does start with 192.168.0, but you want the IP address of the
System Controller to be something other than 192.168.0.200.
1. Start a web browser on your computer.
2. Place the cursor in the address field and type
the welcome page shown below.
3. If you don't see the Aprilaire logo at the lower edge of the page (as shown above), stop and update
your computer as explained in To update your computer to the latest version of java on page 6.
4. Click Start the Configurator Now: after a short delay the Configurator will start.
5. The System tab is selected by default. Click General Data as shown above, and then click the IP
Settings button in the lower right: this brings up the settings dialog shown below:
http://192.168.0.200
and then press Enter to bring up
$
Advertisement
