Aprilaire 8825 Installation, Configuration And User Manual page 34

& '
Use the Mode page to:
Turn heating and cooling on or off.
Set the fan (if applicable) to run continuously or automatically when needed.
To set the climate control system mode:
1. On the Thermostat Settings page, select the tab for the desired thermostat.
2. Select the Mode tab at the top.
3. In the Mode Control section, select the desired mode. Choices include Off, Heating On,
Emergency Heating On (for heat pumps), Cooling On, or Auto, depending on your climate control
system. The button for your choice will turn yellow, and the System Status section will display the
current mode.
To set the fan mode:
1. As above, select the tab for the desired thermostat.
2. Select the mode for the fan: Automatic or Continuous.
!&
(