Advertisement
)#
,- . /
The term HVAC unit refers to the heating and cooling equipment controlled by a thermostat or group of
thermostats.
Based on the settings in the Configurator for the HVAC unit, specific controls will appear in the Viewer on
the appropriate thermostat page. For example, thermostats that control both heating and cooling will
have buttons for both, whereas thermostats that only control heat will not have cooling set points.
You add HVAC units with the Configurator using the HVAC Units branch of the Climate tab.
To add an HVAC unit:
1. In the Climate tab select HVAC Units in the tree structure.
2. Click the Add New HVAC Unit button.
3. Type in the desired name for the HVAC unit and click OK: the properties window for the equipment
appears as shown below.
4. Set Controls Heat: select Yes if this unit produces heat, No if this unit does not control heat.
5. Set Controls Cooling: as above, Yes if this unit controls cooling, otherwise No.
6. Set Controls Fan: Yes if the unit has a fan that can be turned on, otherwise No.
Advertisement
