Advertisement
To add holidays:
1. Click the Climate tab, and then locate and click the Holiday item at the bottom of the tree structure.
2. Click Add New Holiday, then type in the name and the date for the holiday, as shown below.
3. Click OK: the new holiday appears in the tree structure.
4. Continue adding holidays as desired.
To remove holidays:
1. Locate the desired holiday in the Holiday item at the bottom of the tree structure.
2. Click the holiday, then click Remove: the holiday is removed.
IMPORTANT NOTE: Holidays added as described above do not repeat, so that upcoming holidays must
be added periodically. It is recommended that old holidays be removed at the beginning of the year, and
that new holidays be added at that time.
IMPORTANT NOTE: The System Controller is shipped with a standard set of default Holidays, whereas
the images shown above do not show any holidays.
To close the Configurator:
When you are finished, close the Configurator by clicking the 'X' in the upper right-hand corner.
Advertisement
