Advertisement
& '
To make changes to the thermostat's Individual Schedule:
1. On the Thermostat Settings tab, select the desired thermostat from the row of tabs at the bottom.
2. If the active schedule is not the thermostat's Individual Schedule, then use the Prev and Next buttons
until the Individual Schedule is displayed.
3. Use the buttons for each period to change the schedule as desired:
Press the left and right arrow buttons in the Start row to change the start time
Press the up and down arrow buttons in the Heat and Cool rows to change the desired setpoints.
Press the left and right buttons in the Fan row to specify the desired fan state for each period.
To copy a Master Schedule into the thermostat's Individual Schedule:
If you would like to create an Individual Schedule for a thermostat that is very similar to an existing Master
Schedule, use this procedure to copy the Master Schedule into the thermostat's Individual Schedule.
Then, go in and adjust the Individual schedule further.
1. On the Thermostat Settings tab, select the desired thermostat from the row of tabs at the bottom.
2. Use the Prev and Next buttons to select the Master Schedule that you wish to copy. Note that the
Save As Individual button is not active when the thermostat's Individual Schedule is shown.
3. Click the Save As Individual button to the right: this sets the thermostat's Individual Schedule so that
it matches the selected Master Schedule.
4. The current schedule automatically switches to the Individual Schedule.
5. Use the buttons on the schedule page to make the desired changes as shown above.
!"
(
Advertisement
