Advertisement
6. Check the Device ID to confirm that it matches the thermostat address you entered when you
programmed the thermostat. See Communicating Thermostat System Installation Manual
(#DP10005754) for more information.
To set the temperature scale:
1. On the Climate tab, select Options in the system component tree, as illustrated in the image above.
2. If the current setting for Scale is not correct, click the Scale drop down and select the desired scale.
Important Note: If you change the temperature scale you must reset the
thermostats as follows:
o Wait for all thermostats to change their display to the newly selected
scale (this normally takes about 30 seconds).
o Turn off all thermostats by switching off the main power at the bottom
of each Model 8818 Distribution Panel.
o When all the thermostats have been switched off for at least 15
seconds, restore power to all thermostats.
0
Advertisement
