Advertisement
" #
The System tab contains global settings which are typically set once during installation.
To set the System Controller time:
1. Click the System tab, then click System Time in the tree structure as shown below:
2. The properties window displays the System Controller's current time as well as the time on your
computer. Check that the time shown for your computer is the correct time.
3. Click Set Time from this Computer. The time on your computer is used to set the time on the
System Controller.
To backup and restore System Controller settings:
You can make a backup copy of the system settings, such as the thermostats and their names, the
schedules and other system-wide data. If someone accidentally makes changes to the system, you can
later go back and restore the saved settings.
1. Click the System tab, then click Version Control in the tree structure as shown below.
2. In the properties window, click Backup System Data to make a copy of the current settings. Note the
Backup Date and Backup Version displayed at the bottom: this shows when you last backed up the
system data.
3. At any time in the future, click Restore System Data to restore your backed up settings.
4. The Restart System button restarts the System Controller, equivalent to cycling power to the System
Controller.
&
Advertisement
