Advertisement
& '
The System Status tab shows the current status of all the thermostats in the system. Each thermostat is
displayed in its own row with the following information:
NOTE: If the row for a thermostat is red, the thermostat currently has an active alert.
Name
The thermostat's name
Heat
The current heating setpoint
Temp
The current room temperature
Cool
The current cooling setpoint
Status
The current status of the thermostat
Fan
The current status of the fan
Program
The current schedule status: Run, Timed Hold, or Permanent Hold.
Schedule
The thermostat's current schedule
Systems that include humidistats have a second window listing humidistats:
Humidify
The current humidify setpoint
Humidity
The thermostat's current humidity
Dehumidify The thermostat's current dehumidify setpoint
Temperature and humidity sensors are displayed on the Sensors tab, as shown above right.
IMPORTANT NOTE: Only sensors configured as "monitor" (as opposed to "control") are displayed on the
sensors tab.
IMPORTANT NOTE: The outside temperature is also shown down at the bottom: the outside temperature
is always taken from remote sensor #1 on thermostat #1.
(
!
Advertisement
