ZyWALL 10/10 II/50 Internet Security Gateway
Figure 21-10 System Maintenance — Starting Xmodem Download Screen
Step 3.
Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Step 4.
After a successful restoration you will see the following screen. Press any key to restart the
ZyWALL and return to the SMT menu.
Figure 21-12 Successful Restoration Confirmation Screen
21.4 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 - System Maintenance - Upload System Configuration File (for console port).
21-10
Starting XMODEM download (CRC mode) ...
CCCCCCCCC
Figure 21-11 Restore Configuration Example
Save to ROM
Hit any key to start system reboot.
Type the configuration file's
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
Firmware and Configuration File Maintenance