7 Use "put" to transfer files from the Prestige to the computer, for example, "put
config.rom rom-0" transfers the configuration file "config.rom" on your computer to the
Prestige. See earlier in this chapter for more information on filename conventions.
8 Enter "quit" to exit the ftp prompt. The Prestige will automatically restart after a
successful restore process.
27.3.2 Restore Using FTP Session Example
Figure 161 Restore Using FTP Session Example
27.4 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload
configuration files by following the procedure in the previous Restore Configuration section
or by following the instructions in Menu 24.7.2 – System Maintenance – Upload System
Configuration File.
Note: WARNING! Do not interrupt the file transfer process as this may
PERMANENTLY DAMAGE YOUR Prestige.
27.4.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature,
your computer must have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware
and the configuration file using FTP.
Chapter 27 Firmware and Configuration File Maintenance
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Prestige 2302R Series User's Guide
253