Ipsec Setup - ZyXEL Communications ZyWALL 10/10 User Manual

26.4 IPSec Setup

Select Edit in the Select Command field, type the index number of a rule in the Select Rule field and press
[ENTER] to edit the VPN using the menu shown next.
You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully configure and use
FIELD
Index This is the VPN rule index number you selected in the previous menu.
Name Enter a unique identification name for this VPN rule. The name may be up
to 32 characters long but only 10 characters will be displayed in Menu
27.1 - IPSec Summary.
Active Press [SPACE BAR] to choose either Yes or No. Choose Yes and press
[ENTER] to activate the VPN tunnel. This field determines whether a VPN
rule is applied before a packet leaves the firewall.
VPN/IPSec Setup
Menu 27.1.1 – IPSec Setup
Index= 1 Name= Taiwan
Active= Yes
My IP Addr= 0.0.0.0
Secure Gateway Addr= zw50test.zyxel.com.tw
Protocol= 0
Local: Addr Type= SINGLE
IP Addr Start= 1.1.1.1
Port Start= 0
Remote: Addr Type= SUBNET
IP Addr Start= 4.4.4.4
Port Start= 0
Enable Replay Detection = No
Key Management= IKE
Edit Key Management Setup= No
Press ENTER to Confirm or ESC to Cancel:
Figure 26-7 Menu 27.1.1 — IPSec Setup
Table 26-4 Menu 27.1.1 — IPSec Setup
ZyWALL 10/10 II/50 Internet Security Gateway
a VPN.
DESCRIPTION
End= N/A
End= N/A
End= 255.255.0.0
End= N/A
EXAMPLE
1
Taiwan
Yes
26-9