Chapter 6 Internet Access; Internet Access Setup; Ethernet Encapsulation; Figure 6-1 Menu 4 - Internet Access Setup (Ethernet) - ZyXEL Communications ZyWALL 10/10 User Manual

6.1

Internet Access Setup

You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE
Encapsulation.

6.1.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice
is for a dial-up connection using PPPoE. If you choose Ethernet in menu 4 you will see the next screen.
The following table describes this screen.
FIELD
ISP's Name
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 6-1 Menu 4 — Internet Access Setup (Ethernet)

Table 6-1 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
ZyWALL 10/10 II/50 Internet Security Gateway
Internet Access
DESCRIPTION
Chapter 6
6-1