ZyWALL 10/10 II/50 Internet Security Gateway
The example situation looks somewhat like this:
Step 1.
In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping
Sets. Therefore you must choose the Full Feature option from the Network Address
Translation field (in menu 4 or menu 11.3) in Figure 9-17.
Step 2.
Then enter 15 from the main menu.
Step 3.
Enter 1 to configure the Address Mapping Sets.
Step 4.
Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then
enter 1 for the Select Rule field. Press [ENTER] to confirm.
Step 5.
Select Type as One-to-One (direct mapping for packets going both ways), and enter the local
Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1
(our first IGA). (See Figure 9-18).
9-20
Figure 9-16 NAT Example 3
NAT