This chapter teaches you how to manage your SAs by using the SA Monitor in SMT menu 27.2.
1.1. Introduction
A Security Association (SA) is the group of security settings related to a specific VPN tunnel. This menu
(shown next) displays active VPN connections.
When there is outbound traffic but no inbound traffic, the SA times out
automatically after two minutes. A tunnel with no outbound or inbound traffic is
27.1 Using SA Monitor
1. Use the Refresh function to display active VPN connections.
2. Use the Disconnect function to cut off active connections.
Type 2 in Menu 27 - VPN/IPSec Setup, and then press [ENTER] to go to Menu 27.2 - SA Monitor.
#
---
--------------------------------
001
Taiwan : 3.3.3.1 – 3.3.3.3.100
002
003
004
005
006
007
008
009
010
Press ENTER to Confirm or ESC to Cancel:
SA Monitor
"idle" and does not timeout.
Menu 27.2 - SA Monitor
Name
Select Command= Refresh
Select Connection= N/A
Figure 27-1 Menu 27.2 — SA Monitor
ZyWALL 10/10 II/50 Internet Security Gateway
Encap.
IPSec ALgorithm
---------
----------------
Tunnel
ESP DES MD5
Chapter 27
SA Monitor
27-1