Timeout; Factors Influencing Choices For Timeout Values; Table 13-4 Adding/Editing Source And Destination Addresses - ZyXEL Communications ZyWALL 10/10 User Manual

Table 13-4 Adding/Editing Source and Destination Addresses

FIELD
Address Type
Start IP Address
End IP Address
Subnet Mask
When you have finished, click Apply to save your customized settings and exit this screen, Cancel to
exit this screen without saving, or Help for online HTML help on fields in this screen.

13.6 Timeout

The fields in the Timeout screens are the same for Local and Internet networks, so

13.6.1 Factors Influencing Choices for Timeout Values

The factors influencing choices for timeout values are the same as the factors influencing choices for
threshold values – see section 12.4.1. Click on either Local Network or Internet, then select the Timeout
tab.
Creating Custom Rules
Do you want your rule to apply to packets with a particular
(single) IP address, a range of IP addresses (e.g.,
192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop down list box
Enter the single IP address or the starting IP address in a range
here.
Enter the ending IP address in a range here.
Enter the subnet mask here, if applicable.
the discussion below refers to both.
ZyWALL 10/10 II/50 Internet Security Gateway
DESCRIPTION OPTIONS
Single Address
Range Address
Subnet Address
Any Address
13-13