Avaya 2030 Manual page 28

Page 28 – Manager-Secretary Setup
Changing the Soft DSS Display Mode
Changing the Soft DSS Extensions
Changing the Soft DSS Usage
INDeX 9.1 2030/50/60
The display mode sets how many Soft DSS keys you can have; 4 in
half-line mode or 2 in full-line mode. Note that if you change mode
from half-line to full-line, you lose the last two extensions entered.
To set the Soft DSS key display mode:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 33).
3. Press MODE. The display shows the current mode.
4. To change mode, press CHANGE.
5. Press DONE. The display goes to extension entry.
6. Press PROGRAM to finish.
The Soft DSS features only work correctly with extension numbers.
Do not set lines or groups as Soft DSS keys.
To set a Soft DSS key extension:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 33).
3. Press EXTNS. to display the first number set.
• To cancel the number, press CANCEL.
• To display the next number, press NEXT.
• To enter a new number, press NEXT until the top-right
display goes blank, then enter the number.
4. Press PROGRAM to finish.
When using Soft DSS Keys to make a call, the usage setting of the
two phones determines the type of call that occurs (see diagram).
The phone's usage setting affects all of its Soft DSS keys. The
system treats extensions with no Soft DSS Keys as set to NORMAL
CALL.
Usage Setting
Normal or Auto Answer
Normal
Auto Answer
Voice
Voice
Intercom
To set the soft DSS key usage:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 33).
3. Press USAGE. The display shows the current setting.
4. To change the current usage, press CHANGE.
5. Press PROGRAM to finish.
Call Type
< Standard / Standard >
< Page / Standard >
< Direct / Standard >
< Page / Page >
< Page / Direct >
< Direct / Direct >
38DHB0002UKCL - Issue 5 (12/00)
Usage Setting
Normal or Auto Answer
Voice or Intercom
Voice or Intercom
Voice
Intercom
Intercom