Configuring Trap Receiver Stations; Step 3 - Cisco DPA 7630 Administration Manual

Configuring SNMP Settings

Step 3

Step 4

Configuring Trap Receiver Stations

Step 1
Step 2
Step 3
Step 4
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
5-18
Choose Generate authentication traps.
Press Enter to toggle between yes and no.
To set up to four trap receiver stations, perform these steps:
From the main menu, choose Configure.
Choose SNMP.
Choose Trap receiver stations.
Enter the IP address or host name of the network management system used to
receive the traps.
Chapter 5 Getting Started with the DPA 7630/7610
78-11069-03