Supported Protocols On The Dpa 7630/7610; Data And Voice Protocols; Network Management Protocols - Cisco DPA 7630 Administration Manual

Understanding the DPA 7630/7610

Supported Protocols on the DPA 7630/7610

Data and Voice Protocols

Network Management Protocols

Understanding SNMP Support
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
1-6
The DPA 7630/7610 supports several industry-standard and Cisco networking
protocols required for voice communication over an IP network. Additionally, the
DPA 7630/7610 supports protocols required for remote network management.
The DPA 7630/7610 supports the following data and voice communication
protocols.
Internet Protocol (IP)—addresses and sends packets across the network.
•
Trivial File Transfer Protocol (TFTP)—allows you to transfer files over the
•
network.
File Transfer Protocol (FTP)—allows you to transfer files over the network.
•
• Dynamic Host Configuration Protocol (DHCP)—dynamically allocates and
assigns an IP address to network devices.
• Real-Time Transport Protocol (RTP)—enables transporting of real-time data,
such as interactive voice and video over data networks.
• Skinny Client Control Protocol (SCCP)—enables communication between
the DPA 7630/7610 and Cisco CallManager.
• Network Time Protocol (NTP)—enables synchronization of time and date
The DPA 7630/7610 supports Simple Network Management Protocol (SNMP)
and implements several industry-standard Management Information Bases
(MIBs).
The DPA 7630/7610 (with software version 1.1 or higher) supports SNMP
versions 1 and 2, enabling you to perform the following commands:
• Get—Retrieve a specific node's value.
GetNext—Retrieve the first value present in the ordered tree whose node
•
succeeds the one specified.
Chapter 1 Overview
78-11069-03