Advertisement
IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
Configuring IR510 and IR530 Systems
LEDs
Table 15
LEDs for
LED Name
Definition
RSSI
Measure of power present in the received
radio signal.
WPAN
WPAN traffic activity detect.
SYS
Indicates module status.
Antenna
IR530 antenna options are noted in the table below.
Cisco Part Number
ANT-WPAN-OM-OUT-N
For more details on the supported antenna, please refer to the document below:
Connected Grid Antennas Installation Guide
Cable Options
Refer to the
Cisco IR530 Series Resilient Mesh Range Extenders Data Sheet
Configuring IR510 and IR530 Systems
IoT Field Network Director (IoT-FND) 4.2.x release
Cisco IR510 WPAN Industrial Routers" section within the "Managing Devices" chapter.
Related Documentation
Cisco IoT Field Network Director User Guide, Release 4.2.x
Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
IR530 Range Extender
(and later) provides the user interface for IR510 configuration. Refer to the "Managing
State
Yellow (Off) / Green (Off): RSSI less than -105 dBm
Yellow (On) / Green (Off): RSSI is -105 to -95 dBm
Yellow (Off) / Green (Slow Blink): RSSI is -95 to -75 dBm
Yellow (Off) / Green (Fast Blink): RSSI is -75 to -60 dBm
Yellow (Off) / Green (Solid On): RSSI greater than -60 dBm
Yellow (Off) / Green (Off): WPAN port is disabled.
Yellow (On) / Green (Off): Searching for network.
Yellow (Off) / Green (Slow Blink): WPAN port is up.
Yellow (Off) / Green (Fast Blink): Route is available and DHCPv6
configuration is starting.
Yellow (Off) / Green (On): Global IPv6 address is available.
Green (Blinking): Broadcast slot time complete
Yellow (Blinking): Bootload in process
Yellow (Solid): Software update mode in process
Description
Omni antenna for 900 MHz WPAN, outdoor
for a summary of all supported cables.
26
Hide quick links:
Advertisement
