Configuring Telephony Settings; Configuring Octel/Definity Integration Settings - Cisco DPA 7630 Administration Manual

Voice mail gateways

Table of Contents

78-11069-03

Configuring Telephony Settings

Because of its close interaction with Cisco CallManager, Octel, Definity, and

Meridian 1 systems, the DPA 7630/7610 has several critical settings that you

must properly configure. You typically do not need to make any changes on the

other systems to add the DPA 7630/7610 to your network. However, you need

information from these systems to configure these DPA 7630/7610 settings, and

you should verify that they are set up properly. Be sure to review

"Preparing the Cisco CallManager and Octel Systems"

information you need.

These sections provide details about the settings you need to configure on the

DPA 7630/7610:

Configuring Octel/Definity Integration Settings, page 6-1

•

Configuring Octel/Meridian 1 Integration Settings, page 6-6

Configuring Cisco CallManager Settings, page 6-9

•

If you are using the DPA 7630, you must configure settings specific to the

Definity PBX system. The DPA 7630 is designed to integrate into your network

without requiring any changes to the current Definity and Octel settings.

However, you must obtain information from these systems to enable the

DPA 7630 to function properly.

Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide

C H A P T E R

to ensure you have the

Chapter 4,

6-1

Table of Contents

Table of Contents