Upgrading Software Images; Upgrading The Main Image - Cisco DPA 7630 Administration Manual

Upgrading Software Images

Step 3
Step 4

Upgrading Software Images

Upgrading the Main Image

Caution
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
7-2
From the main menu, choose Configure.
Choose Restart.
The Cisco DPA 7630/7610 has two software images: a main software image and
a boot loader. If necessary, you can upgrade these software images.
The main software image might need to be updated if a new release is available
on Cisco.com as a bug update or feature enhancement.
When you send a new software image to the DPA 7630/7610 using FTP, the
current image is automatically deleted. If the FTP transfer terminates before the
new file is copied to the DPA 7630/7610, the DPA 7630/7610 might not be able
to start up. See the "Resolving an Incomplete Upgrade" section on page 7-4
resolve this problem.
To upgrade the main software image, perform these steps:
Obtain a configuration file whose name is in the following format:
dpa-main.<version>.tar
1-1-2.
Connect to the DPA 7630/7610 using FTP and send the configuration file to it.
Restart the DPA 7630/7610 for the new image to take effect.
From the main menu on the DPA 7630/7610, choose Display.
Choose Versions to verify the updated version has been installed.
Chapter 7
, where <version> indicates the release number, such as
Troubleshooting the DPA 7630/7610
78-11069-03
to