Configuring Contact Information; Configuring Contact Name; Configuring System Name - Cisco DPA 7630 Administration Manual

Configuring SNMP Settings

Configuring Contact Information

Configuring Contact Name

Step 1
Step 2
Step 3
Step 4

Configuring System Name

Step 1
Step 2
Step 3
Step 4
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
5-16
You can enter the contact name of the person responsible for the DPA 7630/7610
and the location of the DPA 7630/7610 on your campus.
The contact name on the DPA 7630/7610 corresponds to the sysContact variable
defined in RFC 1213.
To add a contact name indicating the person responsible for the DPA 7630/7610,
perform these steps:
From the main menu, choose Configure.
Choose SNMP.
Choose Contact name.
Enter the name of the person responsible for the DPA 7630/7610.
The system name on the DPA 7630/7610 corresponds to the sysName variable
defined in RFC 1213.
To specify the system name of the DPA 7630/7610 to the network management
system perform these steps:
From the main menu, choose Configure.
Choose SNMP.
Choose System name.
Enter the system name of the DPA 7630/7610.
Chapter 5 Getting Started with the DPA 7630/7610
78-11069-03