Customizing Operation - Furuno FCR-2107 Series Operator's Manual

1. Operational Overview
1.11

Customizing Operation

Several operation items may be customized to suit your needs.
1. Use the trackball to select the MENU box at the right side of the screen then push the left button.
2. Spin the scrollwheel to select Initial Setting.
3. Push the scrollwheel.
4. Move the cursor over the small triangle in the upper left corner of the Initial Settings dialog box to show the
Initial Settings menu. Spin the scrollwheel to select Operation then push the scrollwheel to open the Operation
menu.
Operation menu
5. Set each item as appropriate, referring to the table below for details.
6. Push the right button to close the menu.
Item No.
Key Beep
Wheel Drive
Alarm Level
TTG Display
TTG with VRM
1-16
Operation menu items
Description
Key beeps when key sequence has
been correctly executed.
Select how to cycle data when
using the scrollwheel.
Beep when alarm is generated by
the system.
Select speed to use in TTG
calculation, water speed or ground
speed.
Show TTG below VRM box, in
radar and chart radar modes.
Options
Off, Low, Mid, High
Normal: Cycles numeric data in ascending order and
indication data in clockwise order.
Reverse: Reverse of "Normal".
Off*, Low, Mid, High
(*: radar, chart radar only)
Off (disable TTG feature), Ground speed, Water
speed
Off, VRM1, VRM2, VRM1+VRM2