Furuno FCR-2107 Series Operator's Manual page 5

WARNING
Do not subject the units other than the
antenna unit to rain or water splash.
Fire or electrical shock can result if water
gets inside the equipment.
Do not disassemble or modify the
equipment.
Fire or electrical shock can result if the
equipment is modified.
Do not place liquid-filled containers on
the top of either processor unit.
WARNING
Fire or electrical shock can result if a liquid
spills into a processor unit.
Do not operate the equipment with wet
hands.
Electrical shock can result.
Make sure no is near the antenna unit
before turning on the radar.
Serious injury or death can result if someone
is struck by a rotating radar antenna.
Turn off the power immediately at the
switchboad if water leaks into the
equipment or the equipment is emitting
smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not open the equipment.
Only qualified personnel should work
inside the equipment.
WARNING
Do not leave ropes or other objects
in the vicinity of the antenna unit.
Fire, electrical shock or injury can result if
an object becomes entangled in the antenna
unit.
Use the correct fuse.
Use of an incorrect fuse can causes fire
or serious damage to the equipment.
Warning Labels
Warning labels are attached to the equipment.
Do not remove any label. If a label is missing
or damaged, contact a FURUNO agent or
dealer about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
Radiation hazard. Only qualified
personnel should work inside scanner.
Confirm that TX has stopped before
opening scanner.
Safety Instructions
Name: Warning Label 1
Type: 86-003-1011-1
Code No.: 100-236-231
Name: Warning Sticker
Type: 3-142-3201-0
Code No.: 100-266-890
iii