Furuno FCR-2107 Series Operator's Manual page 331

.
Time table optimization
displayed in route monitoring
Plan final:
This displays ETA at final WPT. This value also appears in the Parameters page of the Plan Route dialog box.
Off Plan:
Indicates time difference between planned ETA and calculated ETA to final WPT.
Suggested SPD:
The system calculates suggested speed so that ETA to the final WPT would be same as planned ETA if type of
optimization was "Time table".
The table below shows how the system calculates ETAs.
Type of chosen speed profile /
optimization on Route Monitor dialog
box
Speed profile: Plan MAX SPEED
Speed profile: Plan TIMETABLE
Speed profile: Plan ECO: COST
Speed profile: Plan ECO: PROFIT
Speed profile: Trial
Speed profile: Current
Used speed from current point
to the To WPT
current average speed
current average speed
current average speed
current average speed
current trial speed
current average speed
11. Route Monitoring
Used speed from the To WPT to the
final WPT
planned leg speed
planned leg speed
planned leg speed
planned leg speed
current trial speed
current average speed
11-9