Resetting (Emptying) Voyage And Danger Targets Logs; Making A User Chart From A Log (Past Track) - Furuno FCR-2107 Series Operator's Manual

16. Recording Functions
16.2.7

Resetting (emptying) voyage and danger targets logs

It may be useful to reset (empty) the voyage and danger targets logs when you are starting a new voyage. If
necessary, make a backup copy before resetting. To reset a log, do the following:
Alert Log
Alert Queue
16.2.8

Making a user chart from a log (past track)

You can create a user chart from any log among details, voyage and danger target. The past track of the Danger Log
target is useful for making a use chart from a single target.
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area then push the left mouse
button. Choose Record from the menu then push the scrollwheel.
2. Choose the log (Details, Voyage, Danger Target) from which you want to make a user chart then push the
scrollwheel.
3. Click the OK button to continue.
4. Choose the log entries which you want to use to create a user chart.
16-12
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the guidance area
then push the left button.
2. Choose Record from the menu then push the scrollwheel.
3. Choose Reset from the menu then push the scrollwheel.
4. Choose the log to reset from the menu then push the scrollwheel.
5. The system will ask you if you are sure to reset chosen log. Click the OK
button to reset the chosen log.
LAT LON Align/NM
Align/ ° COG/ ° HDG/ °
SOG/kn
CORR/ °