Choosing Automatic Senc Conversion And Display Until Date - Furuno FCR-2107 Series Operator's Manual

7. Vector Chart Material
7.3.2

Choosing automatic SENC conversion and display until date

When you are loading new S57 charts base cells and/or their updates into your hard disk, they can be automatically
converted to SENC format. Further, display dates can be set as issue dates automatically. Do the following to set
these options:
7-16
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the mouse function area
then push the right button.
2. Choose System > SENC Convert Settings from the menu then push the
scrollwheel. The SENC Convert Settings dialog box appears:
3. Check Automatic SENC conversion and Automatic Display Until.
4. Click the X at the top of the dialog box to close the box.