Furuno FCR-2107 Series Operator's Manual page 446

22. Maintenance and Troubleshooting
If...
program won't start. "No
connection to dongle. Have a nice
day." appears
monitored route is not displayed
planned route is not displayed
symbol of user chart cannot be
erased
position cannot be found
S57 chart cannot been moved or
zoomed in or out
past track is not displayed
monitored user chart is not
displayed
user chart is not displayed on radar
display
22-6
Chart troubleshooting
Then...
•
Dongle is not connected to USB
port.
•
Route is not selected.
•
Chart is not set to display on
foremost chart layer.
•
route is selected.
•
planned route is not selected
visible top on chart.
•
"Enable changes" is not selected.
•
symbols may be superimposed by
one another.
•
sensors are not selected in
SENSORS dialog box.
•
LAN adapter cable may have
loosened.
•
S57 chart drawing process is
frozen
•
past track is not selected visible.
•
user chart is not selected visible.
•
user chart display is selected for
planning mode.
•
user chart is not selected in
monitoring mode.
•
system has failed to post process
chart for radar.
•
LAN adapter cable may have
loosened.
Remedy
•
Reinsert dongle.
•
Select monitor route.
•
Select route as planned.
•
Open Route page of Chart
Display menu and select planned
route parts to Std or Other.
•
Select "Enable changes" in User
Chart menu.
•
Click Delete button on Symbol
page several times.
•
Check sensor selections in
SENSORS dialog box.
•
Connect LAN adapter cable.
•
Open Chart menu and select
System in Chart menu
•
Select Restart drawing process in
System menu
•
Open Tracking page of Chart
Display menu and select Past
track of System to either Std or
Oth.
•
Open Mariner page of Chart
Display menu and select User
Chart's parts to either Std or Oth.
•
Unselect user chart in planning
mode.
•
Select user chart in monitoring
mode.
•
Close User Chart menu to
activate post processing for user
chart.
•
Connect LAN adapter cable.