Customizing Operation - Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Operator's Manual

1. RADAR OPERATION
1.42

Customizing Operation

Several operation items may be customized to suit your needs.
1. Roll the trackball to choose the MENU box at the right side of the screen and
then push the left button.
2. Roll the wheel to choose 9 [CUSTOMIZE•TEST] and then push the wheel or
the left button to open the CUSTOMIZE•TEST menu.
3. Roll the wheel to choose 7 [OPERATION] and then push the wheel or the left
button.
4. Set each item as appropriate, referring to the table on the next page for
details.
5. Push the right button to close the menu.
1-78
[CUSTOMIZE•TEST]
1 BACK
2 [DATA BOX]
3 [F1]
4 [F2]
5 [F3]
6 [F4]
7 [OPERATION]
8 [TEST]
CUSTOMIZE•TEST menu
[OPERATION]
1 BACK
2 WHEEL DRIVE
NORMAL/REVERSE
3 KEY BEEP
OFF/LO/MID/HI
4 REMOTE KEY
F#-/DISPLAY
5 POP UP GUIDANCE*
OFF/ON
6 OWN SHIP VECTOR
OFF/HDG/COURSE
7 STERN-UP*
OFF/ON
8 SHUTTLE FERRY
OFF/MODE1/MODE2
OPERATION menu
* Not available on IMO or A type