Using Notes - Furuno FCR-2107 Series Operator's Manual

13.2

Using Notes

To prepare Notes, do the following:
1. Place the cursor on Notes in the status bar, then click the Plan or Monitor button as appropriate. If no Notes is
chosen, the Notes menu (shown below) appears in addition to the Monitor Notes dialog box or Plan Notes
dialog box.
2. If no menu appears, click the same button once more to open the menu.
Note: If you want Notes to be displayed on the electronic chart, make sure that Notes options are turned on in the
Mariner page of the Chart Display dialog box.
1.
i
Position Position marker
marker and text
Four different variations as examples of how Notes is presented on the chart area:
1. Position marker
2. Position marker and text
3. Position marker and range marker
4. Position marker, text and range marker
Activate Monitor/Plan mode: User can switch Notes mode between plan and
monitor. Using
Go Monitor mode> Go Monitor mode, Notes used in the planning mode can be
switched directly to the monitoring mode. Using
Go Plan mode> Go Plan mode, Notes used in the monitoring mode can be
switched directly to the planning mode.
Select: Chooses Notes to use; monitor or planning mode.
Unselect: Unselect removes Notes from active use.
Create: Creates new Notes. Notes can be named, using up to 30 alphanumeric
characters.
Backup and Restore: User can make backup copy from Notes or restore from
backup media.
Report: Generates tabulated report from chosen Notes.
2.
THIS IS A TEST
3.
Position marker Position marker,
and range marker text, and range marker
13. Notes
4.
THIS IS A TEST
13-3