Furuno FCR-2107 Series Operator's Manual page 162

6. ECDIS Overview
Activating dialog boxes on the display
There are several dialog boxes which can be activated by mouse-clicking over certain areas on the ECDIS display.
Place the cursor over the appropriate area then pushing the right or left button to display the corresponding dialog
box on the ECDIS display. See the figure below to find the places and button to push to get desired dialog boxes on
the display. To close a dialog box, click the X at the top right corner of the dialog box. Note that only one dialog box
may be shown at a time.
Alerts
WPT Alerts
LON
WPT LAT
6-8
Mode RAD/NM CH LIM/m
WPT count 19
Delete WPT
Adjust after
PLAN ROUTE
SET TIME
MIN/kn MAX/kn
Display All
ALERT
QUEUE
Set Time Zone, Date ...
Set time zone, date and
time
Time Zone:
(0.0) Greenwich Mean T
Automatically adjust clock
for daylight saving
changes
Local Time:
07 Jan 2009 08:35
SENSORS
WPT
NAV
MARKS
MON ROUTE