Furuno FCR-2107 Series Operator's Manual page 549

FURUNO
7. COLOR
7.1 Display unit
7.2 Chart processor unit
7.3 Control unit/Switching hub N3.0
7.4 Antenna unit
7.5 Power processor unit
8. PERFORMANCE MONITOR
8.1 PM-31 (X-band)
Frequency
Input power
Power output
Power output
Level difference
8.2 PM-51 (S-band)
Frequency
Input power
Power output
Power output
Level difference
9.
SWITCHING HUB
9.1 Access
9.2 Transmission speed
9.3 Necessary cabling
9.4 No. of ports
Chassis: 2.5GY/1.5, Panel: N3.0
2.5GY/1.5
N9.5
2.5GY/1.5
9365-9455 MHz
Min. +8 dBm, Max., +28 dBm
-36 dBm (2-phase pulse max output)
-56 dBm (2-phase pulse max output)
9.0-11.0 dB (1-phase pulse, 2-phase pulse)
3020-3080 MHz
Min. +5 dBm, Max., +15 dBm
-15 dBm (2-phase pulse max output)
-35 dBm (2-phase pulse max output)
9.0-11.0 dB (1-phase pulse, 2-phase pulse)
CSMA/CD
Half duplex: 100 Mbps/100 Mbps
Full duplex: 20 Mbps/200 Mbps
10BASE-T: STP cable, category 3 or better
100BASE-TX: STP cable, category 5 or better
8 ports, all ports comply with Auto-MDIX
SP - 5
E3559S01B-M