Roland M-200i V-mixer Owner's Manual page 104

Network
Connecting using WPS
You can make a connection to a Wireless LAN router by using
WPS.
You can also make the connection by pressing the button on
the USB adapter (WNA1100-RL, available separately). For details
of the procedure, refer to "Basic connection method
(connecting using WPS)" (p. 102).
1.
Access the WIRELESS LAN screen.
2.
Select "WPS" and press [ENTER].
The WPS screen appears.
3.
Enable WPS on the Wireless LAN router.
Example:Press the [WPS] button on the Wireless LAN
router.
For information on using WPS on the Wireless LAN router,
refer to the documentation for the router.
4.
Pressing [ENTER].
Make the connection using WPS.
If the connection is successful, the M-200i returns to the
WIRELESS LAN screen.
Connecting in ad-hoc mode (AD-HOC)
This makes the connection in ad-hoc mode.
What's ad-hoc mode?
Ad-hoc mode lets you connect the M-200i and an iPad
directly, without using a Wireless LAN router. This is
convenient when you're making the connection in a
location where your usual Wireless LAN router is not
available.
Restrictions
The iPad connected in ad-hoc mode cannot connect to the
Internet or communicate with other Wireless devices. Note,
however, that if you're using an iPad capable of 3G
communication, then depending on your data plan, using 3G
might incur communication charges.
1.
Access the WIRELESS LAN screen.
2.
Select "AD-HOC" and press [ENTER].
104
The AD-HOC screen appears.
AD-HOC MODE This sets ad-hoc mode on/off.
CH This sets the channel of ad-hoc mode (1-11).
SSID This indicates the ad-hoc SSID.
KEY The ad-hoc key is displayed.
The displayed ad-hoc SSID (M-200i) is the value set using
"WIRELESS ID" at the WIRELESS LAN OPTION screen (p. 105).
3.
On the connected iPad, select the ad-hoc SSID displayed
at the screen just described.
Example:Tap "Settings" -> "Wi-Fi" -> "Choose a
Network," then select the ad-hoc SSID described above.
When a screen for entering the password appears, enter
the ad-hoc key described above.
For information on how to connect to a wireless LAN using
an iPad, refer to the documentation for the iPad.
4.
You can set the channel for ad-hoc mode (1-11) by
changing the value of CHANNEL.
Normally, you don't need to change the channel. You
change the channel only when having difficulty making a
connection.
5.
After making the connection in ad-hoc mode, then on the
iPad, tap "Settings" -> "Wi-Fi" -> "Choose a Network"
and return the setting to its original value.