Roland M-200i V-mixer Owner's Manual page 70

Effects,GEQ,External effects
Using the effect library
You use the effect library to select the effect type. You can recall
effect settings from the library, and store the current effect
settings in the library.
Effect library operations are performed at the FX LIBRARY screen.
1.
Access the EFFECTS screen.
2.
Move the cursor to the LIBRARY button for the desired
effect among "FX1-4" and press [ENTER].
The FX1-4 LIBRARY screen appears.
Any effect types that currently cannot be used are displayed
with a prohibition symbol.
The M-200i's effects have following limitations:
• The total amount of RAM access for FX1 through 4 cannot
exceed 100%.
• Regardless of the amount of available RAM access,
"St.REVERB" cannot be used for more than one FX unit at the
same time.
For the RAM access consumption of each effect algorithm,
refer to "RAM access consumption of each effect algorithm"
(p. 141).
3.
Select the desired number and press [ENTER].
A popup appears.
70
RECALL This recalls the library data selected using the list.
STORE This stores the library data selected using the list.
LOCK This locks the library data selected using the list.
CLEAR This clears the library data selected using the list.
NAME EDIT This edits the name of the library selected using the
list.
For more information on library operations, refer to"Library
operations" (p. 30).