Dca Group Function Screen - Roland M-200i V-mixer Owner's Manual

DCA GROUP FUNCTION screen

1.
Access the DCA GROUP screen.
2.
Press [FUNC] to access the DCA GROUP FUNCTION
screen.
The functions available at the DCA GROUP FUNCTION screen are
as follows:
DCA 1-8 ASSIGN These access the DCA GROUP ASSIGN
screen (p. 61).
DCA 1-8 NAME EDIT These access the NAME EDIT screen (p. 61).
Assigning channels to DCA groups
Selecting "GROUP ASSIGN" at the CHANNEL EDIT FUNCTION
screen also lets you assign channels to DCA groups. For details,
refer to "Assigning channels to DCA groups and mute groups"
(p. 38).
Moving the cursor to the desired DCA group at the DCA screen
and pressing [ENTER] will also let you access the DCA ASSIGN
screen.
1.
Access the DCA GROUP FUNCTION screen.
2.
Select one from among "DCA1-8 ASSIGN" and press
[ENTER] to access the DCA ASSIGN screen.
3.
Select the desired channel and press [ENTER].
4.
Press [EXIT] to quit the screen.
Pressing [SEL] at the top panel while the DCA ASSIGN screen is
displayed lets you turn the corresponding channel's assignment
to the DCA group on/off.
Specifying a name for a DCA group
You can specify a name for each DCA group. A name of up to six
characters can be specified. You use the NAME EDIT screen to
edit the name.
1.
Access the DCA GROUP FUNCTION screen.
2.
Select one from among "DCA1-8 NAME EDIT" and press
[ENTER] to access the DCA NAME EDIT screen.
For information on how to edit the name, refer to "Editing a
name" (p. 33).
DCA groups
61