Roland M-200i V-mixer Owner's Manual page 73

Controlling a GEQ using the top-panel
faders
1.
Access the desired GEQ EDIT FUNCTION screen.
2.
Move the cursor to the GEQ ON FADER and press [ENTER].
You can accomplish GEQ operations using the faders on the
top panel.
The range of corresponding faders is displayed on the
screen.
3.
Press the layer buttons in the LAYER section (p. 18) to
select the band to manipulate.
The bands that correspond to the layer buttons are as
indicated below.
USER1 layer button
USER2 layer button
AUX/MTX/DCA layer button
CH17-32 layer button
CH1-16 layer button
You can change the range of operation by selecting the GEQ
fader with left and right cursor.
[MUTE] buttons flash for faders whose position is anything other
than 0.0dB. Pressing a flashing [MUTE] resets its fader to the
0.0dB position.
When the "0.5dB STEP" setting you can make at the GEQ
FUNCTION screen is turned on, you can operate the GEQ faders
in steps of 0.5 dB.
Disabled
Disabled
630Hz-20kHz
125-4.0kHz
20-630Hz
Effects,GEQ,External effects
73