Roland M-200i V-mixer Owner's Manual page 36

Input channel operations
3 Dynamics
GATE button
1
This turns the gate/expander on/off.
For information on editing gate/expander parameters, refer to
"Gate/expander operations" (p. 44).
COMP button
2
This turns the compressor on/off.
For information on editing compressor parameters, refer to
"Compressor/Limiter operations" (p. 49).
EQ
4
EQ graph
1
This shows the approximate response of the EQ.
EQ button
2
This turns the 4-band EQ on/off.
For information on editing 4-band EQ parameters, refer to "4-
band EQ operations" (p. 55).
Pan fader
5
PAN
1
This adjusts the panning of the audio signal sent to MAIN L/R
in a range of L63 to R63.
MAIN button
2
This turns the send to MAIN L/R on/off.
36
6 Fader
This adjusts the send level to MAIN in a range of -Inf dB to
+10.0 dB.
You can make more-detailed settings by holding down [FUNC]
and operating the value dial.
7 Channel meter
This indicates the signal level of the channel. For a stereo-
linked channel, two meters (L and R) are shown. The level
detection point is according to the setting at the METER
screen.
For details, refer to "METER FUNCTION screen" (p. 59).